文献类型：期刊文献

中文题名：D3级耐水聚醋酸乙烯酯乳液胶粘剂的合成

英文题名：Synthesis of D3-level polyvinyl acetate emulsion adhesive with water resistance

作者：程增会[1] 林永超[2] 刘美红[1] 刘玉鹏[1] 王春鹏[1,3]

第一作者：程增会

机构：[1]中国林业科学研究院林产化学工业研究所,生物质化学利用国家工程实验室,国家林业局林产化学工程重点开放性实验室,江苏省生物质能源与材料重点实验室;[2]南京理工大学化工学院;[3]中国林业科学研究院林业新技术研究所

年份：2015

卷号：24

期号：3

起止页码：40-44

中文期刊名：中国胶粘剂

外文期刊名：China Adhesives

收录：CSTPCD;;北大核心:【北大核心2014】；

基金：中央级公益性科研院所基本科研业务费专项资金项目(CAFINT2010K04)

语种：中文

中文关键词：木材胶粘剂;聚醋酸乙烯酯;乳液;N-羟甲基丙烯酰胺;耐水性;共聚

外文关键词：wood adhesive; polyvinyl acetate（PVAc）; emulsion; N-methylol acrylamide（NMA）; water resistant; copolymerization

分类号：TQ433.433

摘要：以双氧水（H2O2）/酒石酸（TA）为引发剂、N-羟甲基丙烯酰胺（NMA）和醋酸乙烯酯（VAc）为共聚单体,采用半连续滴加法制备出木材粘接用耐水PVAc（聚醋酸乙烯酯）乳液胶粘剂。研究结果表明：VAc/NMA共聚乳液的粒子呈球状结构,其粒径为700~800 nm;该共聚乳液属于假塑性流体,其常温储存稳定性良好,受热储存时的黏度急剧增大;由该共聚乳液制成的木-木胶接件之干态、湿态剪切强度均随NMA掺量增加而有所提高,当w（NMA）≥2%（相对于共聚乳液总质量而言）时,其浸湿再干燥后的干态剪切强度（均超过8 MPa）达到EN 204—2001标准中D3级指标要求。
With hydrogen peroxide（H2O2）/tartaric acid（TA）as initiator,N-methylol acrylamide（NMA）andvinyl acetate（VAc）as comonomers,a PVAc（polyvinyl acetate）emulsion adhesive with water resistant for bondingwood was prepared by semi- continuous instillment method. The research results showed that the VAc/NMAcopolymer emulsion had the spheral structure particles,which particle sizes were 700- 800 nm. The copolymeremulsion belongs to pseudoplastic fluid,its storage stability at normal temperature was good,but its viscosity at storage in thermal atmosphere was sharply increased. The dry-shear strength and wet-shear strength of wood-woodglue joints,which were made by the copolymer emulsion,were somewhat increased with increasing NMA contents,its dry-shear strengths after first soaking again drying could meet D3-level index requirement in EN 204—2001standard because the strengths were all more than 8 MPa when mass fraction of NMA was no less than 2% in totalcopolymer emulsions.