文献类型：期刊文献

中文题名：杀虫、灭菌热湿平衡处理对实木地板坯料质量的影响

英文题名：Effects of Hygrothermal Equalization Treatment for Disinfestation and Sterilization on Quality of Solid Wood Flooring Plank

作者：周凡[1] 周永东[1] 高鑫[1] 曹惠敏[1] 殷方宇[1] 窦青青[2] 杨亮庆[3]

第一作者：周凡

机构：[1]中国林业科学研究院木材工业研究所,北京100091;[2]浙江世友木业有限公司院士工作站,浙江湖州313009;[3]江苏大自然智能家居有限公司,江苏宿迁223723

年份：2023

卷号：37

期号：4

起止页码：36-43

中文期刊名：木材科学与技术

外文期刊名：Chinese Journal of Wood Science and Technology

收录：CSTPCD;;北大核心:【北大核心2020】；

基金：国家木竹产业技术创新战略联盟项目“实木地板坯料灭菌杀虫湿热处理工艺研究”(TIAWBI2021-03)。

语种：中文

中文关键词：实木地板坯料;杀虫;灭菌;热湿平衡处理;干燥质量;残余应力

外文关键词：plank for solid wood flooring;disinfestation;sterilization;hygrothermal equalization treatment;drying quality;residual stress

分类号：S781.7

摘要：选择4种常用进口树种实木地板坯料和1种国产树种实木地板坯料,利用木材常规干燥试验机进行兼顾杀虫(D工艺)、灭菌(S工艺)的热湿平衡处理,检测分析其终含水率、厚度上的含水率偏差、残余应力、可见缺陷等指标变化。结果表明:地板坯料的质量在不同树种、同一批次内均存有差异。本研究中制定的D工艺(65℃/相对湿度73.8%~89.5%)、S工艺(75℃/相对湿度76.7%~91.2%)两个等级,可满足地板坯料杀虫、灭菌的加热技术要求,同时可降低地板坯料内和坯料间的最大含水率偏差,提高含水率均匀度,降低厚度上的含水率偏差,降低残余应力值,且对可见缺陷的影响不明显。热湿平衡处理坯料的质量符合LY/T2058—2022《实木地板坯料》或GB/T6491—2012《锯材干燥质量》中二级材的要求。
The changes in final moisture content,residual stress,and visible defects were examined on four import wood species and one domestic species for solid wood flooring after hygrothermal equalization treatment for disinfestation(D process)and sterilization(S process)by using a conventional wood dryer.The results showed that the quality of flooring planks was varied in different tree species of the same batch.After the treatment,the moisture content deviation in and between flooring planks was reduced;the moisture content uniformity was improved;the moisture content in thickness decreased;and the residual stress was reduced.In addition,changes in the visible defects can be ignored.Consequently,the determined D process(65°C and 73.8%to 89.5%relative humidity)and S process(75°C and 76.7%to 91.2%relative humidity)met the temperature requirements of the hygrothermal process for disinfestation or sterilization,as well as the drying quality improvement of flooring planks.The drying quality of the treated flooring planks met the requirements of the standard LY/T 2058—2022"Blanks for solid wood flooring"and the 2nd grade in GB/T 6491—2012"Drying quality of sawn timber".