文献类型：期刊文献

中文题名：低吸水厚度膨胀率纤维板基材制造工艺技术

英文题名：Manufacturing Technology for Fiberboard Substrate with Low Thickness Swelling

作者：张亚慧[1] 任丁华[1] 朱勇[2] 于文吉[1]

第一作者：张亚慧

机构：[1]中国林业科学研究院木材工业研究所;[2]湖北澳森木业股份有限公司

年份：2015

卷号：22

期号：9

起止页码：12-15

中文期刊名：中国人造板

外文期刊名：China Wood-Based Panels

基金：国家林业公益性行业科研专项项目(201304501)

语种：中文

中文关键词：低吸水厚度膨胀率;纤维板;制造工艺

外文关键词：low thickness swelling rates; fiberboard; manufacturing technology

分类号：TS653

摘要：针对强化木地板基材吸水厚度膨胀率偏高的问题,重点研究低吸水厚度膨胀率纤维板基材制造工艺技术,探讨胶黏剂适应性、压制工艺对板材性能的影响。结果表明,采用三聚氰胺改性脲醛树脂(MUF)胶黏剂,在热压温度180℃,施胶量14%,石蜡加入量1.5%的工艺条件下,工业化生产密度为0.85 g/cm^3的纤维板基材,吸水厚度膨胀率较标准规定的最大限定值降低46%,生产的强化木地板产品合格,具有优良的环保性能。
This research focused on the problem of the high thickness swelling （TS） rates of laminate floor covering, and proposed modified manufacturing technology for fiberboard substrates with low thickness swelling. The authors explored the effects of adhesive adaptability and hot press technology on the performance. The results indicated that with MUF under the conditions of density 0.85 g/cm3, hot-pressing temperature at 180 ℃, adhesive content of 14%, and water-proof agent spread rate of 1.5%, the thickness swelling rates of fiberboard was significantly lower than that of maximum in the standard, realized the manufacturing process of low thickness swelling for fiberboard substrates. The qualified laminate floor covering products can be produced with good environmental- friendly property.