文献类型：期刊文献

中文题名：催化活化法制备高丁烷工作容量颗粒活性炭

英文题名：Preparation of granular activated carbon with high-butane-working-capacity by catalysis activation

作者：朱光真[1] 邓先伦[1] 刘晓敏[1]

第一作者：朱光真

通信作者：Deng, X.-L.

机构：[1]中国林业科学研究院林产化学工业研究所生物质化学利用国家工程实验室国家林业局林产化学工程重点开放性实验室江苏省生物质能源与材料重点实验室

年份：2011

卷号：42

期号：B11

起止页码：884-887

中文期刊名：功能材料

外文期刊名：Journal of Functional Materials

收录：CSTPCD;;EI(收录号：20120614749005);Scopus(收录号：2-s2.0-84863040102);北大核心:【北大核心2008】；CSCD:【CSCD2011_2012】；

基金：林业公益性行业专项资助项目(201004051);"十一五"国家科技支撑计划资助项目(2009BADB1B03)

语种：中文

中文关键词：丁烷工作容量;颗粒活性炭;磷酸;硫酸;杉木

外文关键词：butane working capacity; granular activated carbon; phosphoric acid; sulfuric acid; China fir

分类号：TQ424

摘要：在已报道的高丁烷工作容量（BWC）颗粒活性炭（GAC）的制备研究中,其制备周期比较长。在传统的磷酸法颗粒活性炭的制备过程中,采用了塑化阶段加入浓硫酸来促进杉木屑组织中生物高聚物的酸催化解聚并低分子化。研究结果表明浓硫酸添加量为6%时,GAC的BWC由未添加浓硫酸时的11.9 g/100mL增加到14.4g/100mL,提高了近21%;中孔孔容由0.508cm3/g增加到0.939cm3/g,提高了85%;BET比表面积由1902m2/g增加到2325m2/g,提高了22%;总孔容由1.029cm3/g增加到1.685cm3/g,提高了近64%;微孔容积由0.521cm3/g增加到0.746cm3/g,提高了43%。而且,其制备周期也从先前的20~70h缩短至5h以内。
In some study reports on the granular activated carbon（GAC） with high butane working capacity（BWC）,the preparation period was comparatively long.Adding concentrated sulfuric acid during the plasticizing stage was adopted to promote the phosphoric acid catalysis and depolymerization process of biopolymer in the China fir sawdust structure.All results showed that when 6% of concentrated sulfuric acid was added the BWC of GAC was increased from 11.9g/100mL without adding sulfuric acid to 14.4g/100mL,with an efficiency of 21%;Vmes from 0.508cm3/g to 0.939cm3/g,with an efficiency of 85%;SBET from 1902m2/g to 2325 m2/g,with an efficiency of 22%;Vtot from 1.029cm3/g to 1.685cm3/g,with an efficiency of 64%;Vmic from 0.521cm3/g to 0.746cm3/g,with an efficiency of 43%.Furthermore,the preparation period could be shortened from previous 20-70h to less than 5h on the basis of high butane working capacity.