文献类型：期刊文献

中文题名：杨木单板染色工艺与染料染着量的关系

英文题名：Relation between Dye Adsorption and Dyeing Techniques for Poplar Veneer

作者：周宇[1] 王金林[1]

第一作者：周宇

机构：[1]中国林科院木材工业研究所国家林业局木材科学与技术重点实验室

年份：2006

卷号：20

期号：4

起止页码：7-9

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2004】；

基金：国家高技术研究发展计划(863计划)"木基复合装饰材料制造技术"(2002AA245101);引进国际先进农业科学技术(948计划)"染色技术引进"(2002-44);中日政府间专项技术合作(JICA渠道)"中国人工林木材研究"课题部分内容

语种：中文

中文关键词：I-214杨;单板;染色工艺;染料;染着量

外文关键词：Poplar I-214; veneer; dyeing; dyestuff; adsorbed quantity

分类号：S792.11;TS193

摘要：选取活性艳蓝KN-R染料在不同工艺条件下浸染杨木单板,测定在各种条件下的染着量。结果表明:在不同染色温度与时间的条件下,在染液的质量分数0.01%到0.20%范围内,染色单板染着量与染液质量分数成正比;在不同染色温度和质量分数条件下,随着时间的延长,染着量变化不大;在不同时间、质量分数条件下,随着染色温度上升,染着量变化不显著。因此,活性艳蓝KN-R染液在质量分数0.20%、染色时间1 h、温度40℃下即可达到染色目的。
Poplar （Populus euramericana cv.‘I-214’） veneer with thickness of 0.7 mm was dyed by reactive KN-R blue dyestuff. The influence of dye consumption, as well as technical factors such as dyeing temperature and time, on dyeing effectiveness was evaluated. It was found that the dyestuff quantity absorbed by the veneer increased as the concentration of the dyeing solution rose from 0.01% to 0.02%. Under a certain condition, neither dyeing temperature nor dyeing time had much effect on the veneer, so optimum parameters were determined as follows： concentration of KN-R of 0.20 %, dyeing temperature at 40 ℃ and a duration time for 1 h.