详细信息
Characteristic Value of the Modulus of Elasticity (MOE) for Natural and Planted Larch in Northeast China ( SCI-EXPANDED收录 EI收录) 被引量:1
文献类型:期刊文献
英文题名:Characteristic Value of the Modulus of Elasticity (MOE) for Natural and Planted Larch in Northeast China
作者:Tian, Zhaopeng[1,2] Xu, Junhua[1] Li, Mingyue[1] Wang, Zhaohui[1] Serrano, Erik[2] Gong, Yingchun[1] Ren, Haiqing[1]
第一作者:Tian, Zhaopeng
通信作者:Ren, HQ[1]|[a0005812e0f3d391949bb]任海青;
机构:[1]Chinese Acad Forestry, Res Inst Wood Ind, Beijing 100091, Peoples R China;[2]Lund Univ, Div Struct Mech, SE-22100 Lund, Sweden
年份:2021
卷号:12
期号:7
外文期刊名:FORESTS
收录:;EI(收录号:20212910644101);Scopus(收录号:2-s2.0-85109803642);WOS:【SCI-EXPANDED(收录号:WOS:000676177100001)】;
基金:This research was funded by National Natural Science Foundation of China, grant number 31971596 and the Chinese Scholarship Council grant number 20190320022.
语种:英文
外文关键词:MOE; planted larch; characteristic value; dimension lumber; probability distribution; non-destructive testing
摘要:The density and modulus of elasticity (MOE) distribution can provide information on the effectiveness of parametric and non-parametric methods in calculating the characteristic value of MOE. In this study, we aim to determine the optimal distribution model of the actual measured data of the lumber. We also estimate the lumber's MOE characteristic value and compare the difference in density and MOE between natural and planted larch. Approximately 1200 pieces of dimension lumber of 4 m x 140 mm x 40 mm in size, made from larch and planted larch, were obtained, tested, and the corresponding standard MOE value was calculated. Results revealed the 3-parameter Weibull distribution to be optimal in fitting the natural and planted larch distributions. The parametric method proved effective in calculating the characteristic value of both larch groups, with characteristic MOE values of 9.73 kN/mm(2) and 8.84 kN/mm(2), and characteristic density values of 530 kg/m(3) and 460 kg/m(3) for natural and planted larch, respectively. Moreover, the MOE and density values followed grades C40 and C35. Thus, the conclusion is that the parametric method should be used to determine these characteristic values for natural and planted larch.
参考文献:
正在载入数据...