登录    注册    忘记密码

详细信息

Effect of thermo-hydro-mechanical densification on microstructure and properties of poplar wood (Populus tomentosa)  ( EI收录)  

文献类型:期刊文献

英文题名:Effect of thermo-hydro-mechanical densification on microstructure and properties of poplar wood (Populus tomentosa)

作者:Bao, Minzhen[1,2] Huang, Xianai[3] Jiang, Mingliang[1] Yu, Wenji[1] Yu, Yanglun[1]

第一作者:Bao, Minzhen

通信作者:Yu, Wenji

机构:[1] Key Laboratory of Wood Science and Technology of State Forestry Administration, Research Institute of Wood Industry, Chinese Academy of Forestry, Xiang Shan Road, Hai Dian District, Beijing, 10091, China; [2] China National Bamboo Research Center, Key Laboratory of High Efficient Processing of Bamboo of Zhejiang Province, Wen Yi Road 310, Hangzhou, 310012, China; [3] CanmetEnergy, Ottawa, Natural Recourse Canada, 1 Haneel Dr, Nepean, Ottawa, K1A 1M1, Canada

年份:2017

卷号:63

期号:6

起止页码:591-605

外文期刊名:Journal of Wood Science

收录:EI(收录号:20173704145198);Scopus(收录号:2-s2.0-85028894258)

语种:英文

外文关键词:Pore size - Moisture - Cells - Wood - Biomechanics - Cytology

摘要:This study aimed at developing a thermo-hydro-mechanical (THM) processing to compress poplar wood and investigating the effects of high temperature, moisture, and pressure during the THM processing on the changes in microstructure, porosity, mechanical properties, and dimensional stability of compressed poplar wood. The variations in these properties were correlated and their mathematical relations were determined. Poplar woods with high moisture content were compressed using different pressures at a temperature of 160?°C for different periods. The compression level was characterized by the volume compression ratio (CR), which is defined as the ratio of the compression volume and the original volume of sample before and after THM processing. The obtained results indicated that the high pressure of THM process caused the collapsing of wood cell lumens and the developing of a certain amount of fractures in the cell wall. The damage level of wood cells increased with increasing pressure and time. Moreover, the pressure narrowed the cell lumens, which decreased significantly the pore volume in wood substrate. The pore size distribution shifted from the level of macropores to those of mesopores and micropores after THM process. The THM process created superior mechanical property, especially for those with higher CR. Besides, it was revealed that the process decreased dramatically the set recovery of treated woods and improved their dimensional stability. A significant improvement was achieved in terms of the mechanical and physical properties of compressed poplar wood via the structural reformation during the THM process. ? 2017, The Japan Wood Research Society.

参考文献:

正在载入数据...

版权所有©中国林业科学研究院 重庆维普资讯有限公司 渝B2-20050021-8 
渝公网安备 50019002500408号 违法和不良信息举报中心