文献类型：期刊文献

中文题名：SiO_2浸渍杨木单板/低密度聚乙烯复合胶合板的制备工艺

英文题名：Manufacturing Technology of Composite Made from Low-Density Polyethylene(LDPE)Film and Poplar Veneer Pretreated with SiO_2 Solution

作者：常亮[1] 王正[1] 郭文静[1] 陈勇平[1] 方露[1]

第一作者：常亮

机构：[1]中国林科院木材工业研究所,北京100091

年份：2014

卷号：28

期号：2

起止页码：10-13

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2011】；

基金：农业科技成果转化资金项目“一次性压贴热塑性树脂实木复合地板制造技术”(2012GB24320589)

语种：中文

中文关键词：热塑性树脂胶合板;杨木单板;低密度聚乙烯;Si()z溶胶;浸渍处理;热压工艺

外文关键词：wood/plastic composite plywood; poplar veneer; low density polyethylene（LDPE）;SiO2 solution; immerse treatment; hot-pressing process

分类号：TS653.3

摘要：采用SiO2水性分散液浸渍处理的杨木单板,以低密度聚乙烯(LDPE)薄膜为胶黏剂,制备热塑性树脂胶合板,分析其制备工艺因子对板材性能的影响。结果表明:塑料加入量、热压温度、偶联剂种类等因素对热塑性树脂胶合板的性能有非常显著影响,优化工艺条件制备板材的胶合强度可达到GB/T 9846.3-2004中II类胶合板的要求,表面硬度比未处理板材有所提高,游离甲醛释放量更低。
A kind of eco-friendly wood/plastic composite plywood was made from poplar veneer pretreated with SiO2 solution and low-density polyethylene （LDPE） film. An orthogonal experiment was conducted to evaluate the influence of veneer weight, hot-pressing temperature, hot-pressing time, coupling-agent types and the amount of LDPE on the properties of the plywood. The results showed the amount of LDPE, hot-pressing temperature and types of coupling-agent had significant effects on bonding strength of the plywood. Under optimum manufacturing conditions, the bonding strength of the plywood could meet the requirement for type II plywood according to the national standard GB/T 9846.3-2004. Compared with untreated plywood under same manufacturing conditions, the plywood pretreated with SiO2 and coupling agent KH-590 showed higher surface hardness and lower formaldehyde emissions.