文献类型：期刊文献

英文题名：Impact of footprint diameter and off-nadir pointing on the precision of canopy height estimates from spaceborne lidar

作者：Pang, Yong[1,2] Lefsky, Michael[1] Sun, Guoqing[3] Ranson, Jon[4]

第一作者：Pang, Yong;庞勇

通信作者：Lefsky, M[1]

机构：[1]Colorado State Univ, Ctr Ecol Applicat Lidar, Warner Coll Nat Resources, Ft Collins, CO 80523 USA;[2]Chinese Acad Forestry, Inst Forest Resource Informat Tech, Beijing 100091, Peoples R China;[3]Univ Maryland, Dept Geog, College Pk, MD 20742 USA;[4]NASA, Biospher Sci Branch, Goddard Space Flight Ctr, Greenbelt, MD 20771 USA

年份：2011

卷号：115

期号：11

起止页码：2798-2809

外文期刊名：REMOTE SENSING OF ENVIRONMENT

收录：;EI(收录号：20113714330175);Scopus(收录号：2-s2.0-80052631828);WOS:【SCI-EXPANDED(收录号:WOS:000295501400006)】；

语种：英文

外文关键词：Spaceborne lidar; Lidar waveform simulation; Off-nadir pointing; Footprint diameter; Canopy height; DESDynI; ICESat-II

摘要：A spaceborne lidar mission could serve multiple scientific purposes including remote sensing of ecosystem structure, carbon storage, terrestrial topography and ice sheet monitoring. The measurement requirements of these different goals will require compromises in sensor design. Footprint diameters that would be larger than optimal for vegetation studies have been proposed. Some spaceborne lidar mission designs include the possibility that a lidar sensor would share a platform with another sensor, which might require off-nadir pointing at angles of up to 16 degrees. To resolve multiple mission goals and sensor requirements, detailed knowledge of the sensitivity of sensor performance to these aspects of mission design is required. This research used a radiative transfer model to investigate the sensitivity of forest height estimates to footprint diameter, off-nadir pointing and their interaction over a range of forest canopy properties. An individual-based forest model was used to simulate stands of mixed conifer forest in the Tahoe National Forest (Northern California, USA) and stands of deciduous forests in the Bartlett Experimental Forest (New Hampshire, USA). Waveforms were simulated for stands generated by a forest succession model using footprint diameters of 20 m to 70 m. Off-nadir angles of 0 to 16 degrees were considered for a 25 m diameter footprint diameter. Footprint diameters in the range of 25 m to 30 m were optimal for estimates of maximum forest height (R-2 of 0.95 and RMSE of 3 m). As expected, the contribution of vegetation height to the vertical extent of the waveform decreased with larger footprints, while the contribution of terrain slope increased. Precision of estimates decreased with an increasing off-nadir pointing angle, but off-nadir pointing had less impact on height estimates in deciduous forests than in coniferous forests. When pointing off-nadir, the decrease in precision was dependent on local incidence angle (the angle between the off-nadir beam and a line normal to the terrain surface)which is dependent on the off-nadir pointing angle, terrain slope, and the difference between the laser pointing azimuth and terrain aspect; the effect was larger when the sensor was aligned with the terrain azimuth but when aspect and azimuth are opposed, there was virtually no effect on R-2 or RMSE. A second effect of off-nadir pointing is that the laser beam will intersect individual crowns and the canopy as a whole from a different angle which had a distinct effect on the precision of lidar estimates of height, decreasing R-2 and increasing RMSE, although the effect was most pronounced for coniferous crowns. (C) 2011 Elsevier Inc. All rights reserved.