详细信息
E_0级碱木质素-酚醛复合胶粘剂的研究 被引量:20
Study on composite adhesive of alkali lignin/phenol-formaldehyde resin for E_0 grade plywood
文献类型:期刊文献
中文题名:E_0级碱木质素-酚醛复合胶粘剂的研究
英文题名:Study on composite adhesive of alkali lignin/phenol-formaldehyde resin for E_0 grade plywood
作者:穆有炳[1] 王春鹏[1] 赵临五[1] 储富祥[1]
第一作者:穆有炳
机构:[1]中国林业科学研究院林产化学工业研究所
年份:2008
期号:S2
起止页码:221-224
中文期刊名:现代化工
外文期刊名:Modern Chemical Industry
收录:CSTPCD;;Scopus;北大核心:【北大核心2004】;CSCD:【CSCD2011_2012】;
基金:国家林业局推广项目(2008-13);"948"重大项目(2006-4-C03);"863"项目(2007AA100704)资助
语种:中文
中文关键词:木质素;酚醛树脂;胶粘剂;改性
外文关键词:lignin; phenol-formaldehyde resin; adhesive; modified;
分类号:TQ433.431
摘要:以工业碱木质素为原料,采用羟甲基化反应提高木质素反应活性,确定了羟甲基化反应木质素与甲醛的最佳配比及最佳反应pH:木质素与甲醛比(KL/F)(质量比)为6∶1、反应pH为11.5,并用FT-IR和13C-NMR对羟甲基化反应结果进行了分析。通过羟甲基化木素(HKLF)与酚醛树脂(PF)共混制得木质素酚醛树脂胶粘剂,实验结果表明该胶具有制备工艺简单、再现性好的特点,用HKLF替代50%的酚醛树脂时,其胶合强度达到国家Ⅰ类胶合板的要求,压制的胶合板放置5~7天,甲醛释放量<0.2 mg/L。
The lignin-phenol-formaldehyde resin adhesive were prepared by blending modified technical lignin and phenol-formaldehyde resin.The lignins were modified by hydroxymethylation to increase their reactivity and the resulted hydroxymethylated lignins were analysised by FT-IR and 13C-NMR.The optimal conditions of hydroxymethylation are as follows:the L/F mass ratio is 6∶1,the pH value is 11.5.When 50% of phenol-formaldehyde resin was replaced by hydroxymethylated lignins,the adhesive thus formulated showed simp...
参考文献:
正在载入数据...