文献类型：期刊文献

中文题名：可转移PET镀铝膜复合用胶粘剂的制备与性能

英文题名：Study on preparation and properties of laminating adhesives for transferable PET-aluminum coating

作者：曹珍艳[1,2] 陈鹏鹏[1] 陈日清[1,2] 裘梅琴[1,2] 储富祥[1,2] 王春鹏[1,2]

第一作者：曹珍艳

机构：[1]中国林业科学研究院林产化学工业研究所国家林业局林产化学工程重点开放性实验室;[2]中国林业科学研究院林业新技术研究所

年份：2009

期号：8

起止页码：36-39

中文期刊名：粘接

外文期刊名：Adhesion in China

收录：CSTPCD

基金：中国林科院林业新技术所中央级公益性科研院所基本科研业务费专项资金(项目编号:CAFINT2007C13;CAFINT2008K01)

语种：中文

中文关键词：乳液;胶粘剂;转移复合

外文关键词：emulsion; adhesive; transfer laminating

分类号：TQ331.4

摘要：采用种子乳液聚合方法,制备了适用于PET基材上镀铝层向纸品完全转移复合的水性乳液胶粘剂。考查了软硬单体比例、乳化剂、中和剂等因素对聚合反应及乳液性能的影响,确定了最佳的乳液制备工艺条件。研究结果表明,在软硬单体比例为1.6∶1～2.4∶1、阴/非离子型复合乳化剂用量为混合单体质量的1.3%～2%的条件下,所制备的乳液胶粘剂性能优良。
A kind of emulsion adhesive for transferable PET-aluminum coating laminating on paper was prepared by using seeded emulsion polymerization. The effects of Tg, emulsifiers and neutralization of acrylic acid on polymerization were investigated and the optimal formulation was determined. It was found that the emulsion with excellent performance could be obtained when the soft / hard monomer weight ratio was between 1.6 ： 1 and 2.4 ： 1, and mass fraction of anion and non-ion complex emulsifier were between 1.3% and 2% by weight of mixed