文献类型：期刊文献

中文题名：脱色用木质颗粒活性炭的制备研究

英文题名：STUDY ON THE TECHNOLOGY OF MANUFACTURING GRANULAR ACTIVATED CARBON FROM SAWDUST FOR DECOLORIZATION OF LIQUID

作者：王志高[1] 蒋剑春[1] 邓先伦[1] 许玉[1]

第一作者：王志高

机构：[1]中国林业科学研究院林产化学工业研究所

年份：2005

卷号：25

期号：2

起止页码：39-42

中文期刊名：林产化学与工业

外文期刊名：Chemistry & Industry of Forest Products

收录：CSTPCD;;EI(收录号：2005289209334);Scopus(收录号：2-s2.0-21444432723);CSCD:【CSCD_E2011_2012】；

语种：中文

中文关键词：木屑;颗粒活性炭;液体脱色

外文关键词：sawdust; granular activated carbon; decolorization of liquid

分类号：TQ424.1

摘要：以木屑为原料,磷酸为活化剂,使用捏合机对木屑磷酸混合料进行预处理,制得了脱色用颗粒活性炭.其性能指标为:亚甲基蓝吸附值155～170 mL/g,A法焦糖脱色率100%以上,灰分4%以下,强度95%以上.其孔分布以中孔为主,达到了50%～65%.可用于发酵液等食品和制药行业的脱色精制.研究还着重讨论了制备过程中活性炭的成型机理,认为机械捏合和热处理是提高该颗粒活性炭强度的关键.
Granular activated carbon for decolorization of liquid was made from sawdust by activation with H_3PO_4. The properties of the prepared product were as follows:methylene blue 155-170 mL/g; decolorization of caramel A ≥ 100 %; ash ≤4 %; abrasive resistance ≥ 95 %; and the rate of mesopore 50 %-65 %. Moreover, the modeling mechanism during the preparing process was emphatically discussed to reach the following conclusion: the key point for improving abrasive resistance of granular activated carbon is to chose the suitable conditions of kneading and heat treatment. The product can be applied to the decolorization and refining of fermentation liquid in food and medicine industries.