文献类型：期刊文献

中文题名：旋切竹单板饰面竹刨花板工艺研究

英文题名：Technique study on bamboo particle board of the decoration with peeling bamboo veneer

作者：贺微粒[1] 贺微波[1] 彭立民[2] 周宇[2] 付予[1] 范为超[1]

第一作者：贺微粒

机构：[1]湖南工业大学;[2]中国林科院木材工业研究所

年份：2008

卷号：19

期号：1

起止页码：22-24

中文期刊名：木材加工机械

外文期刊名：Wood Processing Machinery

语种：中文

中文关键词：旋切;竹单板;浸渍剥离

外文关键词：peeling; bamboo, dipping and stripping

分类号：TS655

摘要：用脲醛树脂(UF)与聚醋酸乙烯酯乳液(PVAc)组成的混合液,采用正交试验法对竹单板与竹刨花板进行胶合工艺研究,通过对饰面板物理力学性能和装饰面外观质量分析表明,用0.5mm的竹单板对渐变结构的竹刨花板饰面时,其冷、热压较佳工艺条件为:UF和PVAc的混合比为7:3;涂胶量130g/m^2固化剂用量1.0%(树脂用量比);压力1.2MPa。
Using the mixing liquids of UF and PVAc to study glue technique on bamboo veneer and bamboo particle board with orthogonal testing method. The result shows the technique is reasonable. Bonding particle board of bamboo with bamboo veneer in some proportion, the thickness of bamboo weneer is 0.5mm, the better condition of its cold pressing time and hot pressing time is the mixing liquids of urea-formldehyde resin and poly winyl acetate resin ; rate is 7：3 ; dosage of glue is 130g/m^3; dosage of firming agent is 1.0%; pressure is 1.2MPa.