文献类型：期刊文献

中文题名：竹篾帘搭接对结构用竹篾层积材力学性能的影响

英文题名：Influence of Lap Joint in Bamboo Curtain on Mechanical Properties of Laminated Bamboo Sliver Lumber

作者：高黎[1] 王正[1] 任一萍[1]

第一作者：高黎

机构：[1]中国林科院木材工业研究所

年份：2014

卷号：28

期号：5

起止页码：5-8

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2011】；

基金：林业公益性行业科研专项"大跨度竹质工程构件制造关键技术研究与示范"(201204701)

语种：中文

中文关键词：竹篾层积材(LBSL);竹篾帘;搭接;抗弯性能;抗拉性能

外文关键词：laminated bamboo sliver lumber （LBSL）; bamboo curtain; lap joint; bendingperformance; tensile strength

分类号：S795.9;TS653.3

摘要：竹篾帘拼长是制备超长竹篾层积材(LBSL)的必要手段,竹篾帘端头搭接是拼长的方式之一。对LBSL抗弯及抗拉性能的测试结果表明:搭接长度和位置对板材力学性能影响显著;增加搭接长度有利于提高其抗弯和抗拉性能,当搭接长度大于10mm时,板材的力学性能趋于稳定;搭接接头位于芯层时,板材性能优于接头位于表层。LBSL生产组坯工序要保证竹篾帘搭接长度,同时尽量避免板坯表层出现搭接。
Lap joints are necessary for making ultra-long laminated bamboo sliver lumber （LBSL）. Effects of the length and the position of lap joints were analyzed by testing the lumber＇s bending and tensile strength. The results showed that the length and the position had significant influence on bending （MOE and MOR） and tensile strength （ts）. The length had no significant effect until it exceeded 10 mm. However, when the joints were at the surface of the lumber there was a negative influence on bending and tensile properties. It was concluded that the length of the joints should be longer than 10 mm and should not be at the surface of the lumber.