详细信息
文献类型:期刊文献
中文题名:对苯二甲酸脂肪醇酯的合成及性能研究
英文题名:Synthesis and Performance of Aliphatic Alcohol-based Terephthalate
作者:李科[1,2,3,4] 蒋剑春[1,2,3,4,5] 聂小安[1,2,3,4,5] 陈洁[1,2,3,4] 陈水根[1,2,3,4]
第一作者:李科
机构:[1]中国林业科学研究院林产化学工业研究所;[2]生物质化学利用国家工程实验室;[3]国家林业局林产化学工程重点开放性实验室;[4]江苏省生物质能源与材料重点实验室;[5]中国林业科学研究院林业新技术研究所
年份:2015
卷号:49
期号:5
起止页码:23-26
中文期刊名:生物质化学工程
外文期刊名:Biomass Chemical Engineering
收录:北大核心:【北大核心2014】;
基金:中国林科院中央级公益性科研院所基本科研业务费专项资金(CAFYBB2014MA011);"十二五"国家科技支撑计划资助(2014BAD17B01)
语种:中文
中文关键词:增塑剂;对苯二甲酸;酯化反应;脂肪醇
外文关键词:plasticizer; terephthalic acid; terephthalic; aliphatic alcohol
分类号:TQ35;TQ414
摘要:研究了C4、C6、C8、C10和C14等饱和脂肪醇与对苯二甲酸合成对苯二甲酸脂肪醇酯的方法,并对比了其结晶点、密度、闪点等物化性能。结果表明,C6及以下的脂肪醇在常压低温下很难与对苯二甲酸反应,而C8及以上的脂肪醇在催化下易与对苯二甲酸反应;且C4的对苯二甲酸二丁酯闪点只有180℃;C14醇和酯熔点(结晶点)分别达38和67℃,不便于生产操作和使用;而C8、C10与对苯二甲酸的酯化物介于液固交界处,且闪点不低于210℃,是合成对苯二甲酸酯类增塑剂的合适原料。
The synthesis methods of aliphatic alcohol-based terephthalate were studied using terephthalic acid and saturated aliphatic alcohol ( C4, C6, C8, C10 and C14 ) as raw materials. And the physicochemical properties such as crystallization points, densities, and the flash points et al. were contrasted. The results indicated that the reactions of aliphatic alcohols of Ca and C6 with terephthalic acid at ordinary pressure and low temperature were difficult, and the aliphatic alcohols of Cs, C10 and C14 could easily react with terephthalic acid under catalysis. The flash point of butylene terephthalate ( C4 ) was 180℃. The melting (crystallization) points of alcohol and ester (C14) were 38 ℃ and 67 ℃, respectively, but it was not convenient for the operation and use. While terephthalic esters of Cs and C 10 aliphatic alcohols were between liquid-solid junction, and the flash points were not less than 210 ℃, they were suitable raw material for the synthesis of terephthalic acid esters plasticizer.
参考文献:
正在载入数据...