文献类型：期刊文献

中文题名：改性纳米氧化锆对水性苯丙木器漆漆膜硬度及耐磨性的影响

英文题名：Effect of Modified Nano-zirconia on Hardness and Wear Resistance of Water-borne Styrene-acrylic Wood Coating

作者：钱磊[1] 龙玲[1] 徐建峰[1] 于家豪[1]

第一作者：钱磊

机构：[1]中国林科院木材工业研究所

年份：2015

卷号：29

期号：6

起止页码：14-17

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2014】；

基金：国家林业公益性行业科研专项经费项目"速生材防腐及无机物改性处理有害物质检测与调控技术研究"(201204702-A4)

语种：中文

中文关键词：水性木器漆;纳米氧化锆;漆膜硬度;耐磨性

外文关键词：water-borne wood coating; nano-zirconia; film hardness; wear resistance;

分类号：TQ630.4

摘要：为提高水性苯丙木器漆的漆膜硬度和耐磨性,采用化学法对纳米氧化锆(ZrO2)进行表面改性,制备三种纳米ZrO2浆料,并分别用于水性苯丙乳液的制备,探讨改性方法对纳米ZrO2浆料性能及漆膜耐磨性和硬度的影响。结果表明:聚丙烯酰胺、聚乙二醇和辛基酚聚氧乙烯醚改性的纳米ZrO2,浆料粒径小、黏度低、稳定性好;当纳米ZrO2浆料添加量为1%时,漆膜磨耗值为0.069g/100r,耐磨转数为1 800r,硬度为2H。
Three kinds of nano-zirconia slurries were made by surface chemical modification methods and the slurries were respectively used to prepare styrene-acrylic emulsion,to improve hardness and wear resistance of water-borne styrene acrylate wood coatings.Then the effect of surface modification methods on nano-zirconia slurry properties as well as the hardness and wear resistance of styrene-acrylic wood coatings were investigated.The results showed that the slurries showed excellent performance like small particle size,low viscosity and good stability when polyacrylamide,polyethylene glycol and octylphenol polyoxyethylene ether were used as modifiers.When 1% of the nano-zirconia slurry was added into water-borne styrene acrylate wood coatings,the abrasion value of the coating film was 0.069g/100 rwith 1 800 rof abrasion cycle and 2H of hardness.