文献类型：期刊文献

中文题名：芦苇/杨木纤维板制备工艺研究

英文题名：Study on the Manufacturing Technology of Reed/Poplar fiberboard

作者：张亚慧[1,2] 苏雪峰[3] 陈凤义[4] 任丁华[1,2] 于文吉[1,2]

第一作者：张亚慧

机构：[1]中国林科院木材工业研究所;[2]国家林业局木材科学与技术重点实验室;[3]乌兰察布职业学院建筑技术系;[4]廊坊华日家具股份有限公司

年份：2016

卷号：0

期号：10

起止页码：10-14

中文期刊名：中国人造板

外文期刊名：China Wood-Based Panels

基金：四川省科技计划项目"林-板-家具一体化现代产业链关键技术集成研究与产业化示范项目"(2014NZ0033)

语种：中文

中文关键词：芦苇;杨木;纤维板;制备工艺

外文关键词：Reed;;Poplar;;fiberboard;;manufacturing technology

分类号：TS653.6

摘要：为解决人造板原料供需矛盾,同时开辟经济利用芦苇的新途径,以芦苇和杨木为主要原料,探讨其混合比例、板材密度、施胶量和防水剂量对板材性能的影响。试验结果确定了最佳的制造工艺为混合比例(芦苇∶杨木)70∶30,板材密度0.80 g/cm^3,施胶量14%,防水剂量2%。在此条件下压制的纤维板性能满足GB/T 11718—2009《中密度纤维板》中干燥状态下使用的家具型中密度纤维板的相关规定。
In order to solve the shortage of material for wood-based panels and develop a new way to utilize Reed with good favorable economy and society benefit, the aunthors used utilizedthe Reed and Poplar as the main raw material to manufacture fiberboard. An orthogonal experiment was designed to optimize the process parameters of different mixing ratio of Reed, density, glue content and water-proof agent. The results showed that the optimal factor group were mixing ratio(Reed∶Poplar) 70∶30, 0.80 g/cm^3 of density, 14% of glue content, and 2% of water-proof agent. The fiberboard had the properties exceeding the requirement of the Chinese National Standard of GB/T 11718—2009.