文献类型：期刊文献

中文题名：制造工艺对竹基纤维复合材料性能的影响

英文题名：Effect of Manufacturing Methods on Bamboo-Fiber Based Composite Performance

作者：祝荣先[1] 周月[1] 任丁华[1] 余养伦[1] 于文吉[1]

第一作者：祝荣先

机构：[1]中国林科院木材工业研究所；国家林业局木材科学与技术重点实验室,北京100091

年份：2011

卷号：25

期号：3

起止页码：1-3

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2008】；

基金：国家高技术研究发展计划(863计划)(2010AA101701)

语种：中文

中文关键词：竹基纤维复合材料;冷压成型;热压成型;耐水性能;力学性能

外文关键词：bamboo-fiber based composite; cold pressing; hot pressing; water resistance; mechanical properties

分类号：S795.5;TS653

摘要：采用冷、热压两种生产工艺,分别制备不同密度(0.85～1.20g/cm3)的竹基纤维复合材料,并检测其物理力学性能。结果表明:两种生产工艺均可制备出物理力学性能优良的竹基纤维复合材料,其中:冷压生产的竹基纤维复合材料的耐水性能较好,热压生产的竹基纤维复合材料的抗弯性能和抗剪切性能更优。
The authors made bamboo-fiber based composites with bamboo obtained from a factory. The composites had densities between 0.85 to 1.20 g/cm3 using cold-pressing and hot-pressing methods. The major mechanical and physical properties of these composites were tested. The results showed that both cold-pressing and hot-pressing methods produced composites with high physical and mechanical performance. The composites produced by cold-pressing had better water resistance than those produced by hot pressing. However, the composites produced by hot-pressing had higher bending and shear strengths.