文献类型：期刊文献

中文题名：桉木与杨木阻燃胶合板的性能对比分析

英文题名：Comparison Analysis on Properties of Fire-Retardant Plywood Made with Eucalyptus and Poplar Wood

作者：胡拉[1] 陈志林[1] 傅峰[1]

第一作者：胡拉

机构：[1]中国林科院木材工业研究所国家林业局木材科学与技术重点实验室

年份：2015

卷号：29

期号：3

起止页码：43-46

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2014】；

基金：林业公益性行业科研专项"桉树胶合板产业技术升级关键技术"(201104003-02)

语种：中文

中文关键词：桉木;杨木;阻燃胶合板;性能;对比

外文关键词：Eucalyptus; Poplar; fire-retardant plywood; properties; comparison

分类号：TS653.3;S782.39

摘要：采用磷氮硼复合阻燃剂浸渍处理桉木和杨木单板,分别制备5层阻燃胶合板,检测其物理力学性能和阻燃性能。结果表明:阻燃胶合板的胶合强度,均满足GB/T 9846-2004《胶合板》中Ⅱ类要求,抗弯性能满足LY/T 1738-2008《实木复合地板用胶合板》要求;两树种胶合板相比,杨木阻燃胶合板的胶合强度较好,桉木阻燃胶合板的抗弯性能及阻燃性能更优。
Eucalyptus and Poplar veneers, impregnated with a phosphorus-nitrogen-boron fire retardant solution, were used to make five-ply fire-retardant plywood, respectively. Physical, mechanical and fire-retardant properties were investigated. The results showed that bonding strength of both kinds of fire-retardant plywood could meet the Chinese National Standard GB/T 9846-2004 requirement for II-level plywood. Fire-retardant plywood made with eucalyptus wood showed better modulus of elasticity （MOE） and modulus of rupture （MOR）, better fire-retardant properties, longer time to ignition and lower peak to heat release rate than fire-retardant plywood made with poplar wood.