详细信息
文献类型:期刊文献
中文题名:落叶松锯材抗弯强度尺寸效应
英文题名:Size Effect of Bending Strength of Chinese Larch Lumber
作者:周海宾[1] 王学顺[2]
第一作者:周海宾
机构:[1]中国林业科学研究院木材工业研究所;[2]北京林业大学理学院
年份:2013
期号:1
起止页码:117-120
中文期刊名:土木建筑与环境工程
外文期刊名:Journal of Civil,Architectural & Environmental Engineering
收录:CSTPCD;;Scopus;北大核心:【北大核心2011】;CSCD:【CSCD2013_2014】;
基金:国家林业公益性行业科研专项(201104064)
语种:中文
中文关键词:落叶松;抗弯强度;尺寸效应;木梁
外文关键词:Chinese larch; bending strength; size effect; wood beam
分类号:TU531.1
摘要:以兴安落叶松锯材为研究对象,研究了不同目测等级下锯材尺寸与其抗弯强度之间的关系。试验选取1961根6.5、9.0和14.0cm 3种宽度尺寸的目测等级锯材,每个宽度尺寸分为高、低目测等级组,按照每组试件宽度18倍的测试跨度测试锯材的抗弯强度。利用斜率法和形状参数法确定高、低目测等级组抗弯强度5%分位值的长度与宽度的组合尺寸效应。研究结果表明,斜率法获得高、低目测等级组试件抗弯强度5%分位值的组合尺寸效应分别为0.19和0.23。
The relationship between the bending strength and the size of Chinese larch visually-graded lumber was investigated. 1,961 pieces of lumber with three different widths were divided into two groups of high visual grades and low visual grades. The ultimate bending strength was tested under test spans of 18 times test depths. The combined length and width size effects of 5th percentile o{ bending strength were estimated by the slope method and the parametric method. Using the slope method, the estimated effect parameters of H and L were 0.19 and 0.23 for the 5th percentile.
参考文献:
正在载入数据...