文献类型：期刊文献

中文题名：玻璃纤维布强化杨木胶合板模板研究

英文题名：A Study on Glass-fiber Cloth Reinforced Poplar Plywood for Concrete Forms

作者：贺微粒[1] 焦健[1] 彭立民[2] 周宇[2] 王金林[2]

第一作者：贺微粒

机构：[1]湖南工业大学包装设计艺术学院;[2]中国林科院木材工业研究所

年份：2007

卷号：21

期号：2

起止页码：13-15

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2004】；

语种：中文

中文关键词：杨木;胶合板模板;玻璃纤维布;强化;弹性模量

外文关键词：Poplar; plywood for concrete form; glass-fiber cloth; reinforcement; MOE

分类号：TS653.3

摘要：采用浸胶玻璃纤维布强化方法制造杨木胶合板模板。以杨木胶合板模板的弹性模量为指标,分析玻璃纤维布浸胶量、偶联剂用量、玻璃纤维布上下面单板涂胶量等的影响。在试验确定的优化工艺条件下,模板的纵、横向弹性模量和纵、横向静曲强度分别提高23.6%、35.4%、24.5%和65.3%。
Poplar （Populus deltoides） veneers were used to make plywood for concrete forms. With the modulus of elasticity as an index, the effects of glass-fiber cloth, with the following conditions, were studied： various resin contents, addition of a silicone coupling agent, and resin spread at the interface between the veneer and the glass-fiber cloth. Under the optimum parameters obtained from the experimental results, the MOE∥, MOE⊥, MOR∥and MOR⊥ were improved by 23. 6%, 35.4%, 24.5% and 65.3%, respectively.