文献类型：期刊文献

中文题名：三种非常用树种人工林木材的机械加工性能评价

英文题名：Evaluating on Machining Properties of Wood of Three Less-Commercially Used Plantation Species

作者：谢雪霞[1] 刘波[1] 孙华林[1] 姜笑梅[1] 殷亚方[1]

第一作者：谢雪霞

机构：[1]中国林科院木材工业研究所

年份：2014

卷号：28

期号：4

起止页码：28-31

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2011】；

基金："十二五"国家科技科技支撑计划"非常用树种木材加工性能与加工技术研究"(2012BAD24B01-01)

语种：中文

中文关键词：栗木;刺槐;柳杉;机械加工性能;非常用树种

外文关键词：Castaneamo llissima ; Robinia pseudoacacia ; Cryptomeria fortune ; machining properties; less-commercially used species

分类号：TS612

摘要：通过研究栗木、刺槐和柳杉3种非常用树种的木材机械加工性能,为其高附加值利用提供科学依据。分别测试了3种木材的刨削、砂削、铣削、钻削等机械加工性能。结果表明:栗木和刺槐的综合机械加工性能优于柳杉;随着刨削深度和进料速度的增大,刨削质量下降,其中,进料速度对刨削加工性能的影响大于刨削深度。
To determine wood machining properties of less-commercially used species for high value-added utilization, planning, sanding, shaping, boring, turning and mortising of Castanea mollissima, Robinia pseudoacacia and Cryptomeria fortunei from plantation resources were evaluated respectively, according to Chinese forestry industrial standard LY/T2054-2012. Moreover, the effect of cutting depth and feed rate on planning quality was investigated. The results showed that the comprehensive machining properties of Castanea rnollissima and Robinia pseudoacacia were better than that of Cryptomeria fortunei. Furthermore, wood planning quality of the three species decreased as the increase of cutting depth and feed speed. Also, the effect of feed rate on planning quality was greater than that of cutting depth.