文献类型：期刊文献

英文题名：3D stem model construction with geometry consistency using terrestrial laser scanning data

作者：You, Lei[1,2,3] Guo, Jianwei[2] Pang, Yong[3] Tang, Shouzheng[3] Song, Xinyu[4] Zhang, Xiaopeng[2]

第一作者：You, Lei

通信作者：Song, XY[1]

机构：[1]Xinyang Normal Univ, Coll Comp & Informat Technol, Xinyang, Peoples R China;[2]Chinese Acad Sci, Inst Automat, Natl Lab Pattern Recognit, Beijing, Peoples R China;[3]Chinese Acad Forestry, Inst Forest Resources Informat Tech, Beijing, Peoples R China;[4]Xinyang Normal Univ, Coll Math & Informat Sci, Xinyang, Peoples R China

年份：2021

卷号：42

期号：2

起止页码：714-737

外文期刊名：INTERNATIONAL JOURNAL OF REMOTE SENSING

收录：;EI(收录号：20204709515135);Scopus(收录号：2-s2.0-85096339554);WOS:【SCI-EXPANDED(收录号:WOS:000590648100001)】；

基金：The authors would like to thank all the reviewers for their valuable comments and feedback. This research was funded in part by the National Natural Science Foundation of China (No.31872704, 61761003 and 31470641), the National Key Research and Development Program (No.2017YFD0600404, 2018YFB2100602), the Foundation for Distinguished Young Talents in Higher Education of Henan (No.2020GGJS157), theOpen Project Program of State Key Laboratory of Virtual Reality Technology and Systems, Beihang University (No.VRLAB2019B02) and the Nanhu Scholars Program for Young Scholars of XYNU.

语种：英文

外文关键词：Geometry - Laser applications - Mean square error - Steel beams and girders - Surveying instruments - Three dimensional computer graphics

摘要：The traditional stem model is inconsistent with the real geometry of the stem. Terrestrial laser scanning (TLS) provides a possibility of constructing a realistic stem model. In this study, we present a 3D stem model, which includes the stem axis curve and stem cross-sectional profile curve, with geometrical consistency and stem parameter retrieval methods using TLS data. The 3D stem axis curve is interpolated based on the geometric central points, which are calculated from stem slices formed by stem cross-sections. From the 3D stem axis curve, the stem shape characteristic is clearly depicted in 3D space. Stem parameters, such as the location of a stem cross-section, stem diameter, height, length, curvature and torsion at any position along the stem, are calculated. The stem cross-sectional profile curve is interpolated based on the stem cross-sectional profile points, which are calculated from stem cross-sectional points by angle simplification. Then, the convex-concave characteristic of the stem cross-section is represented by the stem cross-sectional profile curve, and from this, the integral method for basal area calculation is presented. The presented methods were tested on stem points from different tree species with different shape properties. The feasibility and validity of the 3D stem model was demonstrated by 3D stem model visualization. The root mean square error (RMSE) of the presented stem diameter method was 0.129 cm. Compared with the basal area calculated from the cross-sectional profile curve, the mean absolute percentage error (MAPE) and RMSE values of the traditional method were 8.921% and 49.926 cm(2), respectively. The stem parameter retrieval experiment demonstrated the accuracy and practicability of the 3D stem model. Compared with the traditional stem model, the 3D stem model can accurately represent the geometric structure of the stem and provide accurate calculations of stem parameters. It will help improve the applications of TLS in forestry inventories.