文献类型：期刊文献

中文题名：超声辅助磷钨酸催化制备纳米纤维素及其表征

英文题名：Preparation and Characterization of Nanocrystalline Cellulose by Using Sonication Combination with Phosphotungstic Acid

作者：尚倩倩[1,2] 刘承果[1,2] 胡立红[1] 胡云[1] 周永红[1]

第一作者：尚倩倩

机构：[1]中国林业科学研究院林产化学工业研究所,江苏南京;[2]江苏省生物质能源与材料重点实验室,江苏南京

年份：2017

卷号：7

期号：6

起止页码：241-248

中文期刊名：化学工程与技术

外文期刊名：Hans Journal of Chemical Engineering and Technology

基金：江苏省生物质能源与材料重点实验室开放基金(JSBEM201509);江苏省自然科学基金(BK20150072);国家自然科学基金(31700522)。

语种：中文

中文关键词：微晶纤维素;超声;磷钨酸;纳米纤维素

分类号：O64

摘要：在超声作用下,以磷钨酸为催化剂水解微晶纤维素,高效快速的制备纳米纤维素(NCC)。超声功率为250 W及磷钨酸浓度为75%的情况下,室温下超声15 min,NCC产率约为84%。采用透射电子显微镜、X射线衍射仪和傅里叶变换红外光谱仪对NCC的形貌、晶型结构及光谱性质进行分析。结果表明:超声辅助磷钨酸催化制备的NCC呈棒状结构,直径分布在19.6~94.0 nm,长度分布在112.4~639.7 nm,晶型结构仍属于纤维素I型,结晶度为82.9%,NCC仍然具有纤维素的基本化学结构。
A fast and effective method was used for the synthesis of nanocrystalline cellulose (NCC) from microcrystalline cellulose (MCC) by combination of sonication and phosphotungstic acid catalyst. The yield of NCC is about 84% under the reaction condition of phosphotungstic acid concentration of 75%, sonication power of 250 W and 15 min reaction time. The morphological, crystal structure and spectrum properties of NCC were characterized using Transmission electron microscopy (TEM), X-ray diffracmeter (XRD) and Fourier transform infrared spectrometer (FTIR), respectively. The results indicated that rod-like NCC with the size of 19.6~94.0 nm in width and 112.4~639.7 nm in length was obtained. The XRD result confirmed that the NCC is cellulose type I model with the crystallinity of about 82.9%. The results of FTIR analysis showed that the basic chemical structure of cellulose is maintained.