文献类型：期刊文献

中文题名：山楂核制备活性炭工艺的优化

英文题名：Technology Optimization of Preparing Activated Carbon from Hawthorn Kernel

作者：龚建平[1,2,3,4] 陈超[1,2,3,4] 戴伟娣[1,2,3,4] 张燕萍[1,2,3,4] 邓先伦[1,2,3,4]

第一作者：龚建平

机构：[1]中国林业科学研究院林产化学工业研究所;[2]生物质化学利用国家工程实验室;[3]国家林业局林产化学工程重点开放性实验室;[4]江苏省生物质能源与材料重点实验室

年份：2013

期号：2

起止页码：19-22

中文期刊名：生物质化学工程

外文期刊名：Biomass Chemical Engineering

基金：林业公益性行业专项(201004051)

语种：中文

中文关键词：山楂核;活性炭;炭化;活化;精制

外文关键词：hawthorn kernel ; activated carbon ; carbonization ; activation ; refine

分类号：TQ35

摘要：利用废弃的山楂核为原料生产木质颗粒活性炭,并对活性炭生产过程中炭化、活化及精制步骤的工艺条件进行了优化。实验结果表明在炭化过程中,采用2h内缓慢升温至300℃,并维持1h,而后在3h内升温至600℃的炭化方式有利于保证炭化料的得率和强度;活化温度900～950℃,活化时间6h为宜;精制过程中盐酸用量是炭质量的10%为宜。在优化条件下经过炭化和活化制成的活性炭碘值可达1100mg/g,亚甲基蓝吸附值可达180mg/g,强度可达94%,能够满足一般用户的需求。产品通过酸洗和漂洗之后可使铁盐的含量由0.25%降至0.02%,灰分由6%降至2%。
Abandoned hawthorn kernel was utilized for producing woody activated carbon in this work. The process conditions, including carbonization, activation and refine, were optimized. Results showed that, the condition, i. e. , heating to 300 ℃ in 2 h, temperature kept for 1 h, and then heating to 600℃ in 3 h, was beneficial for ensuring the yield rate and strength of the carbonized material during carbonization process. The suitable carbonization condition was heated at 900 -950 ℃ for 6h, and HC1 amount was controlled at 10 % of the carbon during refining process. The activated carbon produced through carbonization and activation processes under the optimal condition had adsorption capacity of 1 100 mg/g for iodine, 180mg/g for methyl blue （MB） , and strength 94%. It is able to meet the demand of general customers. Iron content decreased dramatically from 0.25% to 0.02% and ash content declined from 6% to 2% after washing with acid and water.