文献类型：期刊文献

中文题名：红椿单板旋切年度差异分析

英文题名：Analysis on Veneer Performance of Toona ciliate among Different Ages

作者：郭文仲[1] 彭辉武[2] 徐建民[1] 吴世军[1] 黄卫和[2]

第一作者：郭文仲

机构：[1]中国林科院热带林业研究所,热带林业研究国家林业局重点实验室,广州510520;[2]江西省萍乡市林业科学研究所,萍乡337000

年份：2019

卷号：17

期号：20

起止页码：6829-6832

中文期刊名：分子植物育种

外文期刊名：Molecular Plant Breeding

收录：CSTPCD;;北大核心:【北大核心2017】；CSCD:【CSCD_E2019_2020】；

基金：中央级公益性院所基金(CAFYBB2016SZ002)资助

语种：中文

中文关键词：红椿;单板等级;结子性状;出材率;端裂指数

外文关键词：Toona sureni;Veneer;Knot;Veneer ratio;Crack index

分类号：TS6

摘要：红椿是重要的乡土用材树种,为提高红椿出材率以及单板质量,本研究以建立在云南景谷的5个不同林龄红椿树种作为旋切材料,选取参试材料按单板旋切实验要求锯解制样,在原木两端标记好大小头方向、林龄,进行原木外观形质检测和单板质量等级划分。研究结果表明:大、小端头开裂长度小于沿木开裂长度;随着林龄的增加各端头、沿木开裂长度、出材率、单个端裂指数随之减少,但到达20.5年后有所上升;不同林龄间,活结数量均大于死结数量;随着林龄的增长活结数、死结数随之增加,当到达20.5年后又呈下降的趋势,总体出材率均值为52.17%,单板等级为4.57。因此可知红椿非常适宜单板旋切,且林龄20年后为最佳。本研究结果为红椿单板旋切加工利用积累基础理论。
Toona ciliate is an important local species. In order to improve veneer ratio and veneer grade, this paper took five different age trees of Toona ciliate in Yunnan as veneer material. Direction and age were marked on the log, and contour detection and veneer grade were also recorded. The results indicated that cracking length on the end were shorter than it along the chrunk. As aged, cracking lenth, veneer ratio and crack index were decreased,but then increase after 20.5-year-old. In general, slipknots were more than fast knots. The number of slipknot and fast knot were increased by age whereas decreased after 20.5-year-old. The mean of veneer ratio and veneer grade were 52.17% and 4.57. Toona ciliate is suitable for veneer and 20-year-old is more suitable. These results could accumulate basic theory.