文献类型：期刊文献

中文题名：EP／改性DDM体系的固化反应动力学及性能研究

英文题名：Study on curing reaction kinetics and properties for EP/modified DDM system

作者：杨小华[1,2] 夏建陵[1,2] 张燕[1]

第一作者：杨小华

机构：[1]中国林业科学研究院林产化学工业研究所,生物质化学利用国家工程实验室,国家林业局林产化学工程重点开放性实验室,江苏省生物质能源与材料重点实验室,江苏南京210042;[2]中国林业科学研究院林业新技术研究所,北京100091

年份：2011

卷号：20

期号：12

起止页码：1-4

中文期刊名：中国胶粘剂

外文期刊名：China Adhesives

收录：CSTPCD;;北大核心:【北大核心2008】；

基金：国家自然科学基金项目(30771691)

语种：中文

中文关键词：环氧树脂;4;4'-二氨基二苯基甲烷;固化反应;动力学;力学性能;热变形温度

外文关键词：epoxy resin ;4,4＇-diamino diphenyl methane （DDM） ; curing reaction; kinetics; mechanical property; thermal deformation temperature

分类号：TQ323.5

摘要：采用非等温DSC(差示扫描量热)法对EP(环氧树脂)/改性DDM(4,4′-二氨基二苯基甲烷)体系的固化反应过程进行了跟踪。采用Kissinger、Ozawa、Crane和T-β(温度-升温速率)外推法等得到该固化体系的动力学参数和固化工艺条件,并对其力学性能和热变形温度进行了测定。结果表明:EP/改性DDM体系的表观活化能为49.43 kJ/mol,反应级数为0.869,固化条件为"85℃/2 h→125℃/2 h",热变形温度为130℃;与EP/DDM体系相比,该固化体系的表观活化能降低了7.0%,热变形温度下降了16.1%,拉伸强度和压缩强度提高了20%以上,而弯曲强度和弯曲模量基本上保持不变。
The curing reaction process for EP（epoxy resin）/modified DDM（4,4＇-diamino diphenyl methane） system was tracked by nonisothermal DSC（differential scanning calorimetry）. The kinetics parameters and curing process conditions for the curing system were obtained by Kissinger, Ozawa, Crane and T--β（temperature-heating speed） extrapolation. And the mechanical properties and thermal deformation temperature were mensurated. The results showed that the apparent activation energy was 49.43 kJ/mol, reaction order was 0.869, curing conditions were ＂85 ℃/2 h→125 ℃/2 h＂, thermal＇ deformation temperature was 130℃ for EP/modified DDM system. The apparent activation energy and thermal deformation temperature of EP/modified DDM system were 7.0% and 16.1% respectively less than those of EP/DDM system, the tensile strength and compressive strength of EP/modified DDM system were above 20% more than those of EP/DDM system, but both bend strength and bending modulus were almost Unchanged.