文献类型：期刊文献

中文题名：水热控制下杨木的表层密实化及固定技术

英文题名：Surface Densification and Heat Fixation of Chinese White Poplar by Hydro-Thermal Control

作者：王艳伟[1] 黄荣凤[1] 张耀明[1]

第一作者：王艳伟

机构：[1]中国林科院木材工业研究所国家林业局木材科学与技术重点实验室

年份：2012

卷号：26

期号：2

起止页码：18-21

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2011】；

基金：引进国际先进林业科学技术项目(2009-4-52)

语种：中文

中文关键词：毛白杨;水热控制;表层密实化;密度;硬度;固定

外文关键词：Chinese White Poplar; hydro-thermal control; surface layer densification; density;hardness; fixation

分类号：S792.117;TS65

摘要：通过改变木材的表层水分含量,并利用热压机压板的热量对木材进行水热控制,开展毛白杨木材的表层密实化研究,分析毛白杨木材表层压缩密实化后的密度、硬度和恢复率等能指标。结果表明:表层密实化后的毛白杨木材的表层密度达到0.92g/cm3,为对照材的1.8～2.1倍;硬度达到22.3N/mm2,为对照材的2.4倍;压缩木经180℃、4h的热处理后,变形恢复率可降低30%。
Samples of Chinese White Poplar were hot-compressed under various temperatures and surface layer water content. After densification, the following tests were evaluated.surface density, hardness, and deformation recovery rate. The results showed that, after pressing, the surface layer density and hardness were improved. Then, by keeping the samples under 180 ℃ for 4 hours after pressing, the deformation recovery rate decreased by 30%