文献类型：期刊文献

中文题名：超声波预处理对改善桉木机械浆漂白性能的探究

英文题名：Study on improving bleaching performance of mechanical-route eucalyptus pulp by ultrasonic pretreatment

作者：解存欣[1] 邓拥军[2] 焦健[1] 韩善明[2] 梁龙[1] 田庆文[1] 房桂干[1]

第一作者：解存欣

机构：[1]中国林业科学研究院林产化学工业研究所江苏省生物质能源与材料重点实验室国家林业局林产化学工程重点开放性实验室生物质化学利用国家工程实验室;[2]中国林业科学研究院林业新技术所

年份：2019

卷号：0

期号：2

起止页码：108-111

中文期刊名：现代化工

外文期刊名：Modern Chemical Industry

收录：CSTPCD;;Scopus;北大核心:【北大核心2017】；CSCD:【CSCD_E2019_2020】；

基金：国家重点研发计划项目(2017YFD0601005);江苏省生物质能源与材料重点实验室基金(JSBEM-S-201809)

语种：中文

中文关键词：超声波;桉木;机械浆;过氧化氢漂白

外文关键词：ultrasonic;eucalyptus;mechanical-route pulp;bleaching by hydrogen peroxide

分类号：TS745

摘要：以桉木机械浆为研究对象,考察了超声功率、超声时间、超声预处理浆质量分数等因素对白度的影响。通过对比在不同超声工艺下浆料漂后白度和残余过氧化氢含量的变换趋势,考察超声波预处理辅助漂白的最优工艺条件。实验结果表明,在超声功率为585 W、频率为22. 5 Hz、预处理浆质量分数为2%、预处理时间为30 min的工艺条件下,白度可提高1. 7%ISO,残余过氧化氢含量提高了1. 4%,桉木机械浆漂白性能得到显著提升。超声预处理通过对纤维的空化作用,增强了药液可及度和浸渍渗透效果。
The influences of ultrasonic power,ultrasonic irritation time and pulp concentration for ultrasound pretreatment on pulp whiteness and physical properties are examined through using mechanical-route eucalyptus pulp as research object.The optimal process conditions for bleaching pulp assisted by ultrasonic pretreatment are investigated by comparing the change trends of the whiteness of pulp and the residual content of hydrogen peroxide after pulp bleaching under different ultrasonic processes.The experimental results show that the whiteness of pulp can be increased by 1. 7%ISO and the residual content of hydrogen peroxide rises by 1. 4% when the power and frequency of ultrasonic is 585 W and 22. 5 Hz respectively,the pulp concentration is 2% and pretreatment lasts for 30 min,which translating to a significant improvement of bleaching performance. In addition,the accessibility of the liquid and the effects of impregnation and penetration are enhanced due to cavitation of fibers by ultrasonic pretreatment.