文献类型：期刊文献

中文题名：高密度聚乙烯膜制备杨木胶合板的工艺优化分析

英文题名：Analysis of Optimization Manufacturing Technology of Poplar Plywood Glued with High Density Polyethylene Film

作者：方露[1,2] 常亮[1,2] 郭文静[1,2] 王正[1,2]

第一作者：方露

机构：[1]中国林科院木材工业研究所;[2]国家林业局木材科学与技术重点实验室

年份：2013

期号：5

起止页码：17-20

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2011】；

基金：国家林业公益性行业科研专项重大项目"杨木产业资源材培育及新产品开发关键技术研究"(20100400410)

语种：中文

中文关键词：杨木胶合板;木塑复合胶合板;高密度聚乙烯薄膜;响应面法;胶合强度

外文关键词：Poplar plywood; wood-plastic plywood; high density polyethylene （HDPE） film;Response Surface Methodology（RSM）; bonding strength

分类号：TS653.3

摘要：以高密度聚乙烯薄膜为胶黏剂制备无甲醛杨木胶合板,采用响应面方法优化胶合板的制备工艺。结果表明:热压温度、热压时间、薄膜用量对胶合板的胶合强度均有显著影响,热压温度和时间对胶合强度的交互影响显著。在优化工艺条件下制备的胶合板,胶合强度达1.68MPa,满足标准GB/T 9846.3-2004中II类胶合板的使用要求。
High density polyethylene （HDPE） film was used as adhesive to make formaldehyde- free Poplar plywood. Response Surface Methodology （RSM） was used to optimize the processing technology for the plywood. The authors found that the bonding strength of the plywood was affected greatly by pressing temperature, pressing time as well as the film usage. The interaction effects between the pressing temperature and time were significant. The plywood bonding strength could reach 1.68 MPa under the optimum processing conditions as following： 152 ℃ of pressing temperature, 1.1 ram/rain of pressing time, 264. 92 g/m2 of film usage, and could meet the requirement for type II plywood according to the National Standard of GB/T 9846. 3-2004.