登录    注册    忘记密码

详细信息

尼龙材料定型用乳液胶黏剂的研究     被引量:2

Study on a latex adhesive for the nylon stereotype

文献类型:期刊文献

中文题名:尼龙材料定型用乳液胶黏剂的研究

英文题名:Study on a latex adhesive for the nylon stereotype

作者:张明明[1] 金立维[1,2]

第一作者:张明明

机构:[1]中国林业科学研究院林产化学工业研究所生物质化学利用国家工程实验室国家林业局林产化学工程重点开放性实验室江苏省生物质能源与材料重点实验室,江苏南京210042;[2]中国林业科学研究院林业新技术研究所,北京100091

年份:2012

卷号:41

期号:4

起止页码:591-594

中文期刊名:应用化工

外文期刊名:Applied Chemical Industry

收录:CSTPCD;;CSCD:【CSCD_E2011_2012】;

基金:中央级公益性科研院所基本科研业务费专项资金项目(CAFINT2011K01)

语种:中文

中文关键词:种子乳液聚合;尼龙;丙烯酸(酯)

外文关键词:seeded emulsion polymerization; nylon; acrylate

分类号:TQ323;TQ433

摘要:采用种子半连续乳液聚合的方法合成了苯丙乳液,采用傅里叶红外光谱(FTIR)、差示扫描量热法(DSC)等分析手段研究了聚合物的分子结构。FTIR和DSC表明,两种单体参与共聚反应,且没有均聚物的产生,共聚物的Tg约为36.42℃,明显高于理论值,显示了内交联作用的存在;该苯丙乳液的平均粒径为141.1 nm,且具有很好的单分散性。
The polystyrene-acrylate polymer emulsion was developed by seeded semi-continuous emulsion polymerization.Fourier transform infrared spectrometer(FTIR) and differential scanning calorimetry(DSC) were used to analyze the structure of the polymer.It indicated that two monomers were copolymerized and no homopolymer existed.The glass-transition temperature(Tg) of the obtained polymer was about 36.42 ℃ tested by the DSC,apparently higher than the theoretic value which showed the internal crosslinking effect.Particle size proved that the average diameter of particle was 141.1 nm and the polymer was a monodisperse latex.

参考文献:

正在载入数据...

版权所有©中国林业科学研究院 重庆维普资讯有限公司 渝B2-20050021-8 
渝公网安备 50019002500408号 违法和不良信息举报中心