文献类型：期刊文献

中文题名：国产落叶松规格材木框架墙体抗剪性能研究

英文题名：Shear Performance of Wood-Frame Shear-Walls Framed with Domestic Dimension Lumber

作者：王滋[1] 王丽[1] 武国芳[1] 吴勇[2] 丁青峰[2] 赵荣军[1,3]

第一作者：王滋

通信作者：Zhao, Rongjun|[a000555af1057d20aad88]赵荣军;

机构：[1]中国林业科学研究院木材工业研究所;[2]苏州昆仑绿建木结构科技股份有限公司;[3]中国林业科学研究院林业新技术研究所

年份：2017

卷号：20

期号：5

起止页码：758-764

中文期刊名：建筑材料学报

外文期刊名：Journal of Building Materials

收录：CSTPCD;;EI(收录号：20174704430983);Scopus(收录号：2-s2.0-85034263682);北大核心:【北大核心2014】；CSCD:【CSCD2017_2018】；

基金："十二五"国家科技支撑计划项目(2015BAD14B0502);国家林业局林业科技成果推广项目(201409)

语种：中文

中文关键词：木框架墙体;日本落叶松;兴安落叶松;云杉-松木-冷杉(SPF);抗剪性能

外文关键词：wood-frame shear-wall; Larix kaempferi ; Larix gmelinii ; SPF; shear performance

分类号：TS653.92

摘要：以日本落叶松、兴安落叶松及进口云杉-松木-冷杉(SPF)为木框架,以进口定向刨花板(OSB)为覆面板材料,设计制作了3组共12面木框架墙体.通过单向加载试验和低周往复加载试验,研究了不同木框架对墙体的单位长度承载力、极限位移、弹性抗侧刚度和耗能的影响.结果表明:以日本落叶松、兴安落叶松及进口SPF为木框架的墙体,单位长度承载力分别为9.59,7.08,9.05kN/m,极限位移分别为58.09,53.33,65.84mm,弹性抗侧刚度分别为1 369.92,1 126.30,1 119.04kN/m,耗能分别为7 839.89,5 262.74,8 027.20J/m.以日本落叶松制作的木框架墙体抗剪性能最好.
A total of 12 pieces shear-wall segments were fabricated with three kinds of frame materials including Larix kaempferi dimension lumber,Larix gmelinii dimension lumber and imported SPF,and imported OSB as sheathing panels.The shear-wall were tested under monotonic and cyclic loads respectively,and the effects of different materials of frame on the bearing capacity,elastic shear stiffness,ultimate displacement and energy dissipation of shear walls were investigated.Test results show that the bearing capacities of shear-wall with Larix kaempferi,Larix gmelinii and SPF frames are 9.59,7.08,9.05 kN/m,respectively.The ultimate displacements are 58.09 mm,53.33 mm and 65.84 mm,while the stiffnesses are 1 369.92,1 126.30,1 119.04 kN/m,respectively.The energy dissipations are 7 839.89,5 262.74,8 027.20 J/m,respectively.It can be concluded that Larix kaempferi dimension lumber has a good performance as frame members of shear-wall as shown in the tests.