文献类型：期刊文献

中文题名：Temperature characteristics of wood during microwave treatments

英文题名：Temperature characteristics of wood during microwave treatments

作者：Hui Xiao[1] Lanying Lin[1,2] Feng Fu[1]

第一作者：Hui Xiao

机构：[1]Research Institute of Wood Industry,Chinese Academy of Forestry;[2]Research Institute of Forestry New Technology,Chinese Academy of Forestry

年份：2018

卷号：29

期号：6

起止页码：1815-1820

中文期刊名：林业研究：英文版

收录：CSTPCD;;Scopus;CSCD:【CSCD2017_2018】；

基金：financially supported by the National‘‘Twelfth Five-Year’’ Plan for Science&Technology(No.2015BAD14B04);the Special Fund for Forest Scientific Research in the Public Interest of China(No.201404516)

语种：英文

中文关键词：Microwave;treatment;Pinus;sylvestris;var.mongolica;Initial;moisture;content;Microwave;power;Temperature;characteristics

外文关键词：Microwave treatment;Pinus sylvestris var. mongolica;Initial moisture content;Microwave power;Temperature characteristics

分类号：S7

摘要：In order to investigate the temperature characteristics of wood during microwave(MW) treatments,optical fiber sensors were used to measure wood(Pinus sylvestris L. var. mongolica Litv.) temperatures. The results show that the development of internal temperatures in wood basically includes two patterns during the process of MW treatment. The first may be divided into three phases: warming, constant temperature, and a sharply rising phase. The second pattern may be divided into two phases: warming, and constant temperature. The maximum temperature(MT) and rate of temperature increase(RTI)rose as the microwave power increased. The initial wood moisture content decreased while the period of constant temperature fell. Temperatures varied in different positions in the wood. The order of MT and RTI levels were the upper surface, center, bottom surface and the end point.Along the direction of wood thickness, the closer the monitoring point was to the generator, the faster the temperature increased. The MT and RTI of the end point was a minimum value because of the rapid removal of steam.
In order to investigate the temperature characteristics of wood during microwave(MW) treatments,optical fiber sensors were used to measure wood(Pinus sylvestris L. var. mongolica Litv.) temperatures. The results show that the development of internal temperatures in wood basically includes two patterns during the process of MW treatment. The first may be divided into three phases: warming, constant temperature, and a sharply rising phase. The second pattern may be divided into two phases: warming, and constant temperature. The maximum temperature(MT) and rate of temperature increase(RTI)rose as the microwave power increased. The initial wood moisture content decreased while the period of constant temperature fell. Temperatures varied in different positions in the wood. The order of MT and RTI levels were the upper surface, center, bottom surface and the end point.Along the direction of wood thickness, the closer the monitoring point was to the generator, the faster the temperature increased. The MT and RTI of the end point was a minimum value because of the rapid removal of steam.