文献类型：期刊文献

中文题名：兴安落叶松成熟材指接材抗拉破坏载荷力学模型

英文题名：Modeling longitudinal tensile failure load of Larix gmelinii mature wood finger-jointed lumber

作者：郭莹洁[1] 赵荣军[1] 钟永[1] 任海青[1]

第一作者：郭莹洁

机构：[1]中国林业科学研究院木材工业研究所

年份：2014

卷号：38

期号：5

起止页码：20-24

中文期刊名：南京林业大学学报：自然科学版

收录：CSTPCD;;北大核心:【北大核心2011】；CSCD:【CSCD2013_2014】；

基金：国家林业公益性行业科研专项项目(201104027)

语种：中文

中文关键词：指接材;顺纹抗拉破坏载荷;力学模型;兴安落叶松成熟材

外文关键词：finger-joint lumber; longitudinal tensile failure load; mechanical model; Larix gmelinii mature wood

分类号：S781.2

摘要：以兴安落叶松成熟材指接材为研究对象,以早晚材为基础单元,木材密度为影响木材力学变异性的主要因素,建立并验证成熟材无缺陷指接材顺纹抗拉最大破坏载荷力学模型。模型验证结果表明:利用该模型能够准确求解齿长为27.5 mm、齿底为7.5 mm、齿顶为2.25 mm、齿斜面与齿底夹角为95°,且具有3个胶合面的兴安落叶松成熟材无缺陷指接材顺纹抗拉破坏载荷;但该模型不适用于预测幼龄材,对其指接材顺纹抗拉破坏载荷计算偏差较大。为推广该模型,需补充与兴安落叶松幼龄材相关的模型参数,并需进一步对不同齿形参数的指接材进行验证。
To establish and verify the longitudinal tensile failure load（ LTF） mechanical model of Larix gmelinii mature finger-jointed wood,the properties of earlywood（ EW） and latewood（ LW） were involved. In addition,it considered density as the major factor influencing Larix gmelinii mature wood mechanical properties. The verification results of the model showed that it was possible to build mechanical model of LTF based on different properties of EW and LW. The model of finger-jointed LTF was suitable for Larix gmelinii mature wood,which was verified by the specimen with the node geometric parameters including 27. 5 mm of the length,7. 5 mm of the bottom,2. 25 mm of the top,and the angle of 95°between slope and bottom. However,it couldn＇t predict the LTF of Larix gmelinii juvenile wood. In order to promote the model,it required more verification of various finger-joint figures.