文献类型：期刊文献

中文题名：罗浮锥薄木饰面胶合板生产工艺研究

英文题名：Study on Decorative Technology of Castanopsis faberi Hance Veneer

作者：刘衡[1,2,3] 潘启龙[1,2,3] 唐继新[1,2,3] 蒋志林[1] 杨桂芳[1] 杨丽梅[1] 田龙[1] 黄胜强[1]

第一作者：刘衡

机构：[1]中国林业科学研究院热带林业实验中心,广西凭祥532600;[2]广西友谊关森林生态系统定位观测研究站,广西凭祥532600;[3]崇左凭祥友谊关森林生态系统广西野外科学观测研究站,广西凭祥532600

年份：2024

卷号：44

期号：3

起止页码：206-211

中文期刊名：西南林业大学学报（自然科学）

外文期刊名：Journal of Southwest Forestry University：Natural Sciences

收录：CSTPCD;;北大核心:【北大核心2023】；

基金：崇左市科技计划项目(崇科20210703)资助。

语种：中文

中文关键词：罗浮锥;薄木;热压工艺;涂饰工艺;增值利用

外文关键词：Castanopsis faberi Hancex;veneer;glue and hot pressing technology;finishing technology;high value utilization

分类号：TS653.3

摘要：为提升罗浮锥木材的高附加值,以桉木胶合板为基材,基于正交试验设计,研究施胶量与热压工艺参数(温度、时间和压力)对罗浮锥饰面板的含水率、浸渍剥离和表面胶合强度的影响,探明罗浮锥饰面板的优化生产工艺,明确不同类型清漆(硝基清漆、水性清漆和聚氨酯清漆)涂饰工艺对罗浮锥饰面板的色差和漆膜理化性能的影响。结果表明:罗浮锥饰面板的含水率、浸渍剥离强度及表面胶合强度均符合国标要求,其最佳施胶量为120 g/m^(2),最佳热压温度、热压时间和热压压力分别为160℃、60 s和0.3 MPa;其经硝基清漆涂饰样品的漆膜抗冲击、耐磨、附着力等性能均符合家具表面漆膜理化性能的相关国标要求,经聚氨酯清漆涂饰样品的漆膜抗冲击性不符合家具表面漆膜理化性能相关国标要求,经水性清漆涂饰样品的漆膜耐磨性不符合家具表面漆膜理化性能相关国标要求,但具有最好的附着力和抗冲击性能。罗浮锥木材纹理美观,胶合、热压和涂饰性能优良,作为高端饰面板开发潜力大。
In order to promote the high value utilization of Castanopsis faberi Hance plantation wood,this pa-per taked eucalyptus plywood as the base material,studied the influence of glue and hot pressing technology(glue spread,hot pressing temperature,hot pressing time and hot pressing pressure)on the moisture content,dipping peeling and surface bonding strength of the Castanopsis faberi Hance veneer through orthogonal test method,so as to obtained the production technology of the Castanopsis faberi Hance veneer;Besides,the effects of different kinds of varnishes(nitrocellulose varnish,waterborne varnish and polyurethane varnish)on the color difference parameters and the physicochemical properties of the paint film(resistance to impact,wearability,adhesion,pen-cil hardness)of the Castanopsis faberi Hance veneer were investigated.The results showed that the moisture con-tent,immersion peeling strength and surface bonding strength of the Castanopsis faberi Hance veneer met the requirements of the national standard;The optimal hot pressing process was 120 g/m^(2) of glue,180℃of hot press-ing temperature,60 s of hot pressing time and 0.3 MPa of hot pressing pressure;The impact resistance,abrasion resistance,adhesion and other properties of nitrocellulose varnish and coating film met the requirements of the na-tional standard.The impact resistance of polyurethane varnish coating film did not meet the requirements of the national standard.The abrasion resistance of water-based varnish coating film did not meet the requirements of the national standard,but it had the best adhesion and impact resistance.The Castanopsis faberi Hance wood had beautiful texture,excellent bonding,hot pressing and finishing performance,and had great potential for high-end decorative panel development.