文献类型：期刊文献

中文题名：无纺布增强装饰薄木的柔韧性研究

英文题名：Flexibility of Non-Woven Fabric Reinforced Decorative Veneers

作者：张德文[1,2] 张占宽[1,2] 彭晓瑞[1,2]

第一作者：张德文

机构：[1]中国林科院木材工业研究所;[2]国家林业局木材科学与技术重点实验室

年份：2014

卷号：28

期号：5

起止页码：41-43

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2011】；

基金：林业公益性行业科研专项经费项目“实木复合门机械化制造与环保涂装技术研究”(201204703)

语种：中文

中文关键词：装饰薄木;无纺布;柔韧性;横向抗拉强度

外文关键词：decorative veneer; non-woven fabric; flexibility; transverse tensile strength

分类号：TS653

摘要：选用不同配比的聚乙酸乙烯酯乳液和脲醛树脂胶,制备无纺布增强装饰薄木,分析影响其柔韧性的主要工艺参数。结果表明,采用聚乙酸乙烯酯乳液胶,在涂胶量30g/m2、热压温度115℃、热压时间150s的条件下,无纺布增强装饰薄木的柔韧性最优,且横向抗拉强度显著提高,达到薄木自身强度的5～8倍,满足木制品异形贴面要求。
Non-woven fabric reinforced decorative veneers were developed for overlaying on a special shaped surface bonded with poly vinyl acetate emulsion or urea-formaldehyde resin. In order to improve veneer flexibility and transverse tensile strength, the authors made experiments to optimize the production process. Results showed that better flexibility was obtained when poly vinyl acetate emulsion adhesive was used with 30 g/m^2 resin consumption, 115℃ hot-pressing temperature, and 150 seconds hot-pressing time thereby causing a 5~8 times increase in veneer transverse tensile strength.