登录    注册    忘记密码

详细信息

一种新型纤维素吸附剂的制备研究     被引量:2

Preparation of a Novel Cellulose Adsorbent

文献类型:期刊文献

中文题名:一种新型纤维素吸附剂的制备研究

英文题名:Preparation of a Novel Cellulose Adsorbent

作者:王瑀[1,2] 王丹[1,2] 商士斌[1,2] 宋湛谦[1,2] 王宏晓[1,2]

第一作者:王瑀

机构:[1]中国林业科学研究院林产化学工业研究所;[2]国家林业局林产化学工程重点开放性实验室

年份:2008

卷号:28

期号:2

起止页码:77-81

中文期刊名:林产化学与工业

外文期刊名:Chemistry and Industry of Forest Products

收录:CSTPCD;;Scopus;CSCD:【CSCD_E2011_2012】;

基金:引进国际先进林业科学技术重大项目(2006-4-C03)

语种:中文

中文关键词:吸附剂;丙烯酸;丙烯酰胺;纤维素;接枝共聚

外文关键词:adsorbent ; acrylic acid ; acrylamide ; cellulose ; graft copolymerization

分类号:TQ424;TQ352

摘要:采用蔗渣纤维素、丙烯酸(AA)、丙烯酰胺(AM)、甲基丙烯酰氧乙基三甲基氯化铵(MAETAC)为原料,通过接枝共聚反应制备出一种新型纤维素吸附剂,对制备该吸附剂的影响因子如碱化时间、碱质量分数、单体的用量、引发剂(NaHSO3、(NH4)2S2O8)用量、温度和时间等条件进行了分析研究。该纤维素吸附剂的最佳合成工艺为:碱化时间90min,NaOH质量分数30%,AA中和度60%,相对于吸附剂整体,纤维素质量占20%,单体AA占47.3%,AM占26.3%,MAETAC占6.4%,引发剂占2.6%(相对于单体用量),反应温度70℃,反应时间3h。该工艺条件下所得吸附剂对Cu2+的吸附量达25.1mg/g。
A novel cellulose adsorbent was made from bagasse cellulose, acrylic acid (AA) , acrylamide (AM) , and [ 2-( methyl- acryloyloxy) ethyl] trimethylammonium chloride (MAETAC) through graft copolymerization. Factors affecting the adsorption capacity of the product, such as NaOH mass fraction, alkalification time, AA dosage, neutralization degree of AA and AM dosage, were discussed in detail. The optimal conditions were found to be as follows: NaOH mass fraction 30 % , alkalification time 90 min, cellulose dosage 20 %, neutralization degree of AA 60 %, AA dosage 47.3 %, AM dosage 26.3 %, MAETAC dosage 6.4 % , initiator dosage 2.6 % , reaction temperature 70 ℃, reaction time 3 h. Cu^2+ adsorption of the adsorbent made under the optimized synthesis condition was 25.1 mg/g.

参考文献:

正在载入数据...

版权所有©中国林业科学研究院 重庆维普资讯有限公司 渝B2-20050021-8 
渝公网安备 50019002500408号 违法和不良信息举报中心