文献类型：期刊文献

中文题名：木结构覆板用胶合板的防腐处理工艺及性能评价

英文题名：Evaluation of Processing Technology and Performance of Preservative-treated Plywood for Wood-frame Structures

作者：张景朋[1] 王朝晖[1] 马星霞[1] 屈伟[1] 蒋明亮[1]

机构：[1]中国林业科学研究院木材工业研究所,北京100091

年份：2020

卷号：34

期号：3

起止页码：14-17

中文期刊名：木材工业

外文期刊名：China Wood Industry

收录：CSTPCD;;北大核心:【北大核心2017】；

基金：“十三五”国家重点研发计划课题“竹装饰材料长效防护与功能改良关键技术”(2017YFD0600803);“十二五”国家科技计划课题“木材和竹材综合利用关键技术研究”(2014BAL03B02)。

语种：中文

中文关键词：覆板胶合板;木结构;铜唑;处理工艺;耐腐性能;力学性能

外文关键词：sheathing plywood;wood-frame structures;copper triazole;treatment procedure;durability;mechanical properties

分类号：S781.7;TS653.3

摘要：采用铜唑防腐剂,测试处理后胶合板的耐腐性能和力学性能。通过评价处理试板的吸液量和透入度,结合考虑生产效率,确定的优化真空处理工艺为:真空-0.04 MPa处理10 min,常压渗透保持10 min。在此条件下处理的试板受褐腐菌和白腐茵侵染后的质量损失率均小于5%,达强耐腐等级;弹性模量和静曲强度满足GB/T 22349-2008《木结构覆板用胶合板》的要求。
Copper triazole was chosen to treat the sheathing plywood using vacuum processes at various pressures and treatment duarations.The durability and mechanical properties of the treated samples were examined.The results revealed that parameters of the optimized treatment were:vacuum in-0.04 MPa for 10 minutes,then soaking at the atmospheric pressure for 10 minutes.The testing result showed that the preservative-treated plywood presented a high level of durability with less than 5%of mass losses;and the modulus of rupture and modulus of elasticity of the samples met the requirements on sheathing plywood for wood-frame structures of the Chinese national standard GB/T 22349-2008.