文献类型：会议论文

英文题名：Effect of surface roughness on near infrared models for wood density analysis

作者：Liu, Yana[1] Yang, Zhong[1] Lv, Bin[1] Zhang, Maomao[1]

第一作者：Liu, Yana

通信作者：Yang, Z.|[a000582b58b3d5ac02fc4]杨忠;

机构：[1] Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing, China

会议论文集：Proceedings of 2012 International Conference on Biobase Material Science and Engineering, BMSE 2012

会议日期：October 21, 2012 - October 23, 2012

会议地点：Changsha, China

语种：英文

外文关键词：Density (specific gravity) - Forecasting - Hardwoods - Infrared devices - Multivariant analysis - Near infrared spectroscopy - Wood

年份：2012

摘要：The near-infrared spectroscopy (NIR) coupled with multivariate analysis to predict density of wood samples with two surface roughness levels was analyzed in order to investigate the effect of surface roughness on NIR predicting wood density in this paper. The main results were described as follows: (1) The predicting results of density model based on samples with smooth surface performed better than that based on samples with coarse surface. The correlation coefficients of calibration model and validation model of samples with coarse surface based on the NIR which were obtained from cross section of samples were 0.81 and 0.74, and that of the samples with smooth surface were 0.94 and 0.88 respectively. (2) The NIR with wavelength ranges of 350～500 nm and 2 350 ～ 2 500 nm showed significant spectral response to wood surface roughness. (3) It was suggested that the surface roughness of prediction samples should be same to that of the calibration samples. ? 2012 IEEE.