文献类型：期刊文献

中文题名：松香接枝纳米纤维素增强天然橡胶复合材料的制备及性能研究

英文题名：Preparation and Characterization of Rosin Grafted Cellulose Nanocrystals Reinforced Natural Rubber Composites

作者：郭晓亮[1,2] 祁思迈[1,2] 王春鹏[1,2] 王基夫[1,2] 储富祥[1,2]

第一作者：郭晓亮

机构：[1]中国林业科学研究院林产化学工业研究所,生物质化学利用国家工程实验室,国家林业和草原局林产化学工程重点实验室,江苏省生物质能源与材料重点实验室,江苏南京210042;[2]南京林业大学江苏省林业资源高效加工利用协同创新中心,江苏南京210037

年份：2021

卷号：41

期号：5

起止页码：72-78

中文期刊名：林产化学与工业

外文期刊名：Chemistry and Industry of Forest Products

收录：CSTPCD;;Scopus;北大核心:【北大核心2020】；CSCD:【CSCD2021_2022】；

基金：国家自然科学基金资助项目(31971600)。

语种：中文

中文关键词：脂松香;纤维素纳米晶体;天然橡胶;聚合物;复合膜

外文关键词：rosin;cellulose nanocrystals;natural rubber;polymer;composite membrane

分类号：TQ35

摘要：采用松香改性纤维素纳米晶体(CNC),合成松香接枝纤维素纳米晶体(R-CNC),并以R-CNC增强天然橡胶(NR),制备松香接枝纤维素纳米晶体增强天然橡胶(R-CNC/NR)复合材料,并采用FT-IR、UV-Vis、XRD、SEM和万能试验机对R-CNC和R-CNC/NR的结构及性能进行表征。FT-IR证明R-CNC成功合成,通过UV-Vis试验得松香的接枝率为30%,XRD试验测得R-CNC/NR的结晶度为53.94%,SEM分析表明相比于CNC,R-CNC作为填料在NR分子中具有更好的相容性。通过拉伸试验表明NR拉伸强度为0.33 MPa;当CNC质量分数为40%时,纤维素纳米晶体增强天然橡胶(CNC/NR)的拉伸强度为1.56 MPa,弹性回复率88.75%;当R-CNC质量分数为40%时,R-CNC/NR的拉伸强度为2.87 MPa,弹性回复率90.04%。因此R-CNC作为填料更好的增强了NR的机械性能。
Cellulose nanocrystals(CNC)modified by rosin were used to synthesize rosin grafted cellulose nanocrystals(R-CNC).And R-CNC was applied as filler to strengthen natural rubber(NR)forming rosin grafted cellulose nanocrystals reinforced natural rubber composites(R-CNC/NR).FT-IR,UV-Vis,scanning electron microscope(SEM),X-ray diffraction(XRD)and tensile strength were employed to investigate the properties and performance.The successful grafting of rosin from CNC could be proved by FT-IR.The grafting rate of rosin calculated by UV-Vis was 30%.XRD proved that R-CNC/NR had excellent crystallinity.SEM test showed that R-CNC had better compatibility with NR.Tensile test showed that the tensile strength of NR was 0.33 MPa.When the content of CNC was 40%,the tensile strength of natural rubber reinforced by cellulose nanocrystals(CNC/NR)was 1.56 MPa and the elastic recovery value was 88.75%.When the content of R-CNC was 40%,the tensile strength of R-CNC/NR was 2.87 MPa and the elastic recovery value was 90.04%.Therefore,the reinforcing effect of R-CNC on NR was better than that of CNC.