详细信息
Preparation and characterization of epoxy-crosslinked soy protein adhesive ( SCI-EXPANDED收录 EI收录) 被引量:18
文献类型:期刊文献
英文题名:Preparation and characterization of epoxy-crosslinked soy protein adhesive
作者:Hao, Xiu[1] Fan, Dong-Bin[1]
第一作者:Hao, Xiu
通信作者:Fan, DB[1]|[a0005c9807e2805d84556]范东斌;
机构:[1]Chinese Acad Forestry, Res Inst Wood Ind, Beijing 100091, Peoples R China
年份:2018
卷号:32
期号:24
起止页码:2682-2692
外文期刊名:JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
收录:;EI(收录号:20184406013918);Scopus(收录号:2-s2.0-85055714830);WOS:【SCI-EXPANDED(收录号:WOS:000461877600004)】;
基金:The authors are grateful for the financial support of the National Key Research and Development Program of China [2016YFD060070502].
语种:英文
外文关键词:Soy protein isolate; cross-linking; wet shear strength; water resistance
摘要:In this study, the soy protein was degraded and cross-linked with trimethylolpropane triglycidyl ether (THPTG) at 80 degrees C to prepare wood adhesive for interior plywood. Namely, by adding sodium hydroxide (NaOH), functional groups (-NH2, -COOH, and -OH) in soy protein were exposed and then reacted with epoxy groups to form a crosslinked water-resistance soy-protein adhesive under alkali condition. The optimum formulation of this adhesive was investigated. The molecular weights, chemical structure, bonding properties and water-resistance were characterized by gel permeation chromatography-multi-angle laser light scattering (GPC-MALLS), Fourier transform infrared spectroscopy (FTIR), plywood bonding test and three-cycle soak test. Results showed that at 2% NaOH, the molecular weight of soy protein isolate degradation (DSP) presented as 3.473e + 04 g center dot mol(-1) was homogeneous and resulted in greater increase of amide II and amide III. The cross-linking reaction between THPTG and DSP resulted in the increase of both viscosity and sensitivity of infrared absorption peaks of -O-H (3100 cm(-1)) and C-N (1190 cm(-1)). Also, the adhesives synthesized from the SPI denatured with 2% NaOH and 9% THPTG did meet the wet strength for interior-use plywood panels (>= 0.7 MPa) according to the China Industry Standard GB/T 9846.3-2004 and water resistance according to American National Standard for Hardwood and Decorative Plywood/Hardwood Plywood and Veneer Association.
参考文献:
正在载入数据...